ESREL 2022 Organising Committees
General Chairs:

Simon Wilson. President of the Irish statistics Association. Simon is an Professor In statistics at Trinity College Dublin. He was awarded a PhD in stochastic modeling from the George Washington University, Washington, DC, in 1993. His research interests are in applications of Bayesian methods in reliability and other fields of science and engineering. Lead of the Insight Centre for Data Analytics.

Maria Chiara Leva, Environmental Health Sustainability Institute TU Dublin, Ireland co-Chair of the HRA and HF committee in ESRA

General Co-Chairs:

Terje Aven, Center for Risk Management and Societal Safety, University of Stavanger, Norway 

Enrico Zio, MINES Paris, PSL University, Centre de Recherche sur les Risques et les Crises (CRC), Sophia Antipolis, France and

Department of Energy, Politecnico di Milano, Milano, Italy

Cepin Marko, Chair of ESRA,  University of Ljubljana, Slovenia

Technical Program Committee Chairs:

Edoardo Patelli, Head of the Centre for Intelligent Infrastructures University of Strathclyde, UK

Luca Podofillini, Vice-chairman of ESRA, senior scientist Paul Scherrer Institut Switzerland

 

Local Organizing Committee 

John Kelleher, Academic Leader, Information, Communications and Entertainment Institute (ICE) 

Victor Hrymak, chair of the Maters in Environmental Health and Safety TU Dublin

Patricia Ennis, lecturer in Chemical Risk Management in the School of Chemical and Pharmaceutical Science TU Dublin, 

Jesus Frias, Academic Leader of the Environmental Sustainability and Health Institute

Other members of the Technical Committee

Abrahamsen Eirik B., University of Stavanger, Norway
Adey Bryan T., ETH-Zürich, Switzerland
Al Masry Zeina, FEMTO-ST, École Nationale Supérieure de Mécanique et des Microtechniques, France
Ale Ben, Delft University of Technology, Netherlands
Alibrandi Umberto, Aarhus university, Denmark
Andrews John, University of Nottingham, United Kingdom
Anjos Miguel, The university of Edinburgh, United Kingdom
Antoni Marc, UIC, France
Baraldi Piero, Department of Energy, Politecnico di Milano, Italy
Barreau Mihaela, LARIS, Université d'Angers, France
Barros Anne, CentraleSupelec, Paris Saclay University, France
Barthelemy Laurent, ENSM - IUML, France
Basten Rob, Eindhoven University, Netherlands
Bastidas-Arteaga Emilio, La Rochelle University, France
Batteux Michel, IRT System X, France
Beaurepaire Pierre, Institut Pascal Clermont–Ferrand, Université Clermont Auvergne, France
Ben Abdessalem Anis, LARIS, Université d'Angers, France
Berenguer Christophe, Univ. Grenoble Alpes, Grenoble INP, France
Bigaud David, LARIS, Université d'Angers, France
Blondet Gaëtan, Phimeca Engineering, France
Bonato Marco, Valeo Thermal Systems, France
Borgonovo Emanuele, Universita' Bocconi, Italy
Bouillaut Laurent, Université Gustave Eiffel, France
Brinzei Nicolae, University of Lorraine, CRAN UMR 7039, France
Bris Radim, VSB Technical University of Ostrava, Czechia
Brissaud Florent, RICE GRTgaz, France
Brito Mario, University of Southampton, United Kingdom
Cai Baoping, China University of Petroleum, China
Castanier Bruno, LARIS, Université d'Angers, France
Chatti Nizar, LARIS, Université d'Angers, France
Chioccarelli Eugenio, Mediterranea University of Reggio Calabria, Italy
Cito Pasquale, University of Naples Federico II, Italy
Coelho Mário, University of Minho, Portugal
Coit David, Department of Industrial & Systems Engineering, Rutgers University, United States
Contento Alessandro, University of Illinois at Urbana-Champaign, United States
Cozzani Valerio, University of Bologna, Italy
Delavernhe Florian, LARIS, Université d'Angers, France
Delmas Kevin, ONERA, France
Dersin Pierre, ALSTOM Transport, France
Di Maio Francesco,  Politecnico di Milano, Italy
Di Nardo Mario, Università di Napoli "Federico II", Italy
Do Phuc, Lorraine university, France
Fang Yiping, CentraleSupelec, Paris Saclay University, France
Fink Olga, ETH-Zürich, Switzerland
Flage Roger, University of Stavanger, Norway
Follut Dominique, ENSM - IUML, France
Fouladirad Mitra, Université de Technologie de Troyes, France
Gardoni Paolo, University of Illinois at Urbana-Champaign, United States
Gaudoin Olivier, Univ. Grenoble Alpes, France
Girard Sylvain, Phimeca Engineering, France
Grall Antoine, Université de technologie de Troyes, France
Han David, The University of Texas at San Antonio - UTSA, United States
Hassel Henrik ,Division of risk management and societal safety, Lund University, Sweden
Hazin Marcelo, Universidade Federal de Pernambuco (UFPE), Brazil
Herrera Ivonne, Norwegian University of Science and Technology, Trondheim (NTNU), Norway
Heurtier Jean-Michel, PRINCIPIA, France
Houe Ngouna,Raymond Toulouse INP, ENIT, France
Johnsen Stig Ole, SINTEF Digital, Norway
Judic Jean-Marc, Faurecia Seating, France
Kammouh Omar, Delft University of Technology, Netherlands
Khakzad Nima, Ryerson University, Canada
Khebbache Selma, IRT SystemX, France
Kirytopoulos Konstantinos, University of South Australia, Australia
Knapstad Tonja, Western Norway University of Applied Sciences, Haugesund & University of Stavanger, Norway
Kongsvik Trond, Norwegian University of Science and Technology, Norway
Konstandinidou Myrto, NCSR DEMOKRITOS, Greece
Kopustinskas Vytis, Joint Research Centre, Italy
Kosgodagan Alex, Université Catholique de l'Ouest, France
Landi Luca, Department of engineering - Univerisity of Perugia, Italy
Landucci Gabriele, Università di Pisa | UNIPI, Italy
Laronde Rem,i Valeo, France
Leppäaho Oskari, Valeo GEEDS, France
Leray Philippe, Université de Nantes, France
Levitin Gregory, Israel Electric Corporation, Israel
Levrat Eric, Université de Lorraine, CRAN, France
Li Yan-Fu, Department of Industrial Engineering, Tsinghua University, China
Liang Zheng-Lin, Department of Industrial Engineering, Tsinghua University, China
Lirong Cui, Beijing Institute of Technology, China
Liu Yiliu, Norwegian University of Science and Technology, Norway
Markova Jana, Czech Technical University in Prague | ČVUT · Klokner Institute, Czechia 
Martorell Sebastián, Universidad Politécnica de Valencia, Spain
Medjaher Kamal, INPT-ENIT, University of Toulouse, France
Mendoza Jorge, HEC Montréal, Canada
Mock Ralf, Step Commerce AG, Switzerland 
Mödden Heinrich, German Machine Tool Builders' Association (VDW), Germany 
Monica Luigi, Inail Institute – Rome, Italy
Moro Tanguy, Institut de Recherche Technologique Jules Verne , France
Mosalam Khalid M., University of California at Berkeley, United States
Mosleh Ali, University of California Los Angeles, United States
Nguyen Thi-Phuong-Khanh, Toulouse INP, ENIT, France
Nogal Maria, Delft University of Technology, Netherlands
Pakrashi Vikram, University College Dublin, Ireland

Postiglione Fabio, University of Salerno, Italy
Pannier Marie-Lise, LARIS,  Université d'Angers, France
Perdriau Richard, ESEO, France
Peres François, ENIT, France
Ponchet Durupt, Amélie Université de Technologie de Compiègne, France
Prosvirnova Tatiana, ONERA, France
Ramos Marilia, University of California Los Angeles, United States
Remenyte-Prescott Rasa, University of Nottingham, United Kingdom
Rey Valentine, Université de Nantes - GeM/IUML, France
Rigaud Eric, Ecole des Mines de Paris, France
Saintis Laurent, LARIS, Université d'Angers, France
Sansavini Giovanni, ETH-Zürich, Switzerland
Schauer Stefan, AIT Austrian Institute of Technology GmbH, Austria
Schoefs Franck, Université de Nantes - GeM/IUML, France
Selvik Jon Tømmeraas, University of Stavanger, Norway
Shafiee Mahmood, Cranfield University, United Kingdom
Sun Mu-Xia, Department of Industrial Engineering, Tsinghua University, China
T. Castro Inma, University of Extremadura, Spain
Tacnet Jean-Marc, Universite Grenoble Alpes, INRAE, UR ETNA, France
Tanguy Christian, Orange, France
Thieme Christoph A., Norwegian University of Science and Technology, Norway
Tiplica Téodor, LARIS, Université d'Angers, France
Tsui Kwok, Leung Virginia Tech, United States
Tubis Agnieszka, Wroclaw University of Science and Technology, Poland
Utne Ingrid B., Norwegian University of Science and Technology, Norway
Valis David,  Univerzita Obrany v Brně, Czechia
Van Gelder Pieter, Delft University of Technology, Netherlands
Verron Sylvain, LARIS, Université d'Angers, France
Vintr Zdenek, University of Defence, Czechia
Vu Hai, Canh University of Technology of Compiègne, France
Walls Lesley, University of Strathclyde – Glasgow, United Kingdom
Wang Jin, Liverpool John Moores University, United Kingdom
Werbińska Sylwia, Wroclaw University of Science and Technology, Poland
Xie Min, City University of Hong Kong, China
Yalamas Thierry, Phimeca Engineering, France
Ylonen Marja, VTT Technical Research, Finland
Yusta Loyo, Jose Maria Universidad de Zaragoza, Spain
Zeng Zhiguo, CentraleSupelec - Paris Saclay University, France
Zerhouni Noureddine, FEMTO-ST, École Nationale Supérieure de Mécanique et des Microtechniques, France

Zhang, Mimi, Trinity College Dublin